Nissan Leaf Owners Manual | 2025

5.4.2.2. Selecting the child restraint system for each seating position

A child restraint system that can be used differs according to the seating position.

imageimage

(1)

Front passenger seat

(2)

Row 2: left hand outboard seat

(3)

Row 2: centre seat

(4)

Row 2: right hand outboard seat

image

Suitable for child safety seats that are fixed with vehicle seat belt

image

Suitable for i-Size child safety seats

image

Prohibit installation of rearward facing child restraint system

image

Seats equipped with top tether anchor

image

Suitable for child safety seats listed in the attached list

  • *1:Adjust the seat lifter to the uppermost position.
  • *2:Adjust the seat slide to the rear most position.
  • *3:Do not install child restraints with a support leg.
  • *4:Move the head restraint to the upper most position or remove it (and store securely) if there is any interference with the child restraint. Do not remove head restraint when using a booster cushion only.
  • *5:Adjust the centre console to the front most position.

Detailed information for child restraint system installation

Seat position number

Front

Rear

(1)

(2)

(3)

(4)

Passenger Air Bag ON

Passenger Air Bag OFF¹

Left¹

Centre¹ ²

Right¹

Seating position suitable for universal belted (Yes/No)

No

Yes

Yes

Yes

Yes

i-Size seating position (Yes/No)

No

No

Yes

No

Yes

Seating position suitable for lateral fixture (L1/L2)

Largest suitable rearward facing fixture (R1/R2X/R2/R3)

R3

R3

Largest suitable forward facing fixture (F2X/F2/F3)

F3

F3

Largest suitable booster fixture (B2/B3)

B3 (Belted Only)

B3

B3 (Belted Only)

B3

  • ¹Move the head restraint to the upper most position or remove it (and store securely) if there is any interference with the child restraint. Do not remove the head restraint when using a booster cushion only.
  • ²Not suitable for child restraint systems with a support leg.

List of recommended child restraints

Height

(approx.)

Recommend CRS¹

40 - 83 cm

Maxi Cosy Pearl 360 + FamilyFix 360 Base (RWF only)

84 - 105 cm

Maxi Cosy Pearl 360 + FamilyFix 360 Base (recommended RWF)

100 - 150 cm

Britax Römer Kidfix Pro Style²

  • ¹Move the head restraint to the upper most position or remove it (and store securely) if there is any interference with the child restraint. Do not remove the head restraint when using a booster cushion only.
  • ²It is recommended to use a backrest with the lap belt Secure Guard, in the event that the backrest is removed the lap belt Secure Guard should not be used.
Parent topic: