To operate the power tailgate, the vehicle must be in the P (Park) position.

The power tailgate will not operate if the battery voltage is low.

If the tailgate is open approximately 150 mm (5.9 in) or less from the fully closed position, power tailgate cannot be performed by any switch operations. To operate the power tailgate, manually close the tailgate.

The power tailgate operation can be activated or deactivated in the vehicle information display. (See

If the power open or close operation is performed consecutively, the safety mode activates and the operation cannot be performed for a certain period of time. In this case, wait for a while and then perform the operation.