Charge schedule is performed according to the current time setting on the display. When setting the charge schedule function, be sure to check that the current time displayed is correct.

The Li-ion battery may not be fully charged if the charge schedule start time and end time are set such that there is not enough time to charge the Li-ion battery.

To turn off the charge schedule function, touch the [ON] key on the charge schedule setting screen until the indicator lights are turned off. After this operation has been performed, the charge schedule function is turned off. The start and stop time settings are not deleted, even if the charge schedule function is turned off.

If the day of the week is not selected on the charge schedule setting screen, the charging timer will not operate on that day. The system will wait until the next set charging time to perform charging.

The timer setting can be changed while charge schedule is in operation. When the setting is changed while charge schedule is in operation, the new settings are applied immediately.

The Li-ion battery will not charge when the charge connector is connected to the vehicle until the next scheduled charge start time when the charge schedule is active. If necessary, use immediate charge or remote charge (where fitted) to charge the Li-ion battery.

Some charging stations used to perform normal charge are equipped with timer functions. If the charger timer function and the vehicle timer are both set, and the two timers are not set to operate at the same time, it is possible that the charger will not start or that the Li-ion battery will not be fully charged.

The Li-ion battery may not be charged to the limit or the charging time may be longer when the Li-ion battery temperature control system or the air conditioning system operates while charging using the charge schedule.

Li-ion battery electricity will be consumed if the Li-ion battery temperature control system or the air conditioning system operates while the vehicle is not in charging state.