Nissan Leaf Owners Manual | 2025
9.17.7.7. CRUISE Navi Link - a feature of ProPILOT Assist with Navi-link (where fitted)
Listed below are the system limitations for the CRUISE Navi Link. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death:
There are limitations to the CRUISE Navi Link system capability. The system does not function in all driving, traffic, weather and road conditions. It is the driver’s responsibility to stay alert, drive safely, and be in control of the vehicle at all times.
The CRUISE Navi Link system does not brake the vehicle to a stop. Whenever necessary, the driver must apply appropriate braking.
It is the driver’s responsibility to select the proper speed, follow all traffic regulations and observe other road users.
The CRUISE Navi Link may not operate properly in some road and traffic conditions, the system may unexpectedly change the speed. The driver must manually control the vehicle speed.
Below are some examples:
When driving in countries or areas not covered by the Map locator system.
When the data from the Map locator system is not up-to-date or is unavailable.
When the Map locator system is recalculating the route.
When driving in countries or areas not covered by the Map locator system.
When driving on a road under construction or newly constructed road.
When driving near a road split or junction.
When driving in bad weather or poor road conditions.
When the camera cannot correctly detect the lanes.
When the Map locator system cannot connect to the server to get map information.
When the software licence for the Map locator system has expired.
When the ProPILOT Assist with Navi-link is active, the CRUISE Navi Link uses road information provided by the Map locator system to adjust the vehicle speed depending on the following situations:
Curves
Motorway exits
Roundabouts
T-junctions
Also, the CRUISE Navi Link adjusts the vehicle speed when the turn signal indicator is turned on and the following situation is detected:
Turning at junctions
The system may not always reduce speed for all curves, exits, roundabouts, X/T-junctions, or side-turns and the driver may need to apply additional braking at any time.
When the vehicle is through the curve, exit, roundabout, X/T-junction, or side-turns, the vehicle will accelerate again to the set speed. When exiting the limited access motorway, the driver will need to apply braking at the end of the exit.
The system does not operate when the accelerator pedal is depressed.
The system may not operate depending on the set distance to the vehicle ahead and vehicles detected ahead.
System display and indicators
Road information indicator
Appears when the system adjusts the speed depending on turns or exits.
 | Curves | |
 | Right exits | |
 | Left exits | |
 | Roundabouts | |
 | T-junctions | |
 | X-junctions and side-turns | |
How to activate or deactivate the system
Push the
button on the steering wheel until [Settings] appears in the vehicle information display, and push the scroll dial.Use the scroll dial to select [Driver Assistance]. Then push the scroll dial.
Select [Intelligent Cruise] and push the scroll dial.
Select [Navi Link] and push the scroll dial to turn the system on or off.
The system will retain current settings in the vehicle information display even if the EV system is restarted.