Press the charge connector unlock switch (A) in the charge port after unlocking the driver's door or approaching the vehicle with the Intelligent Key.

Remove the charge connector from the charge port.

When connecting or removing the charge connector, the charge port light will illuminate for approximately 30 seconds. (See

Attach the cap (where fitted) to the normal charge connector.

Model with NISSAN EVSE: Remove the domestic plug from the dedicated electrical outlet.

Model with NISSAN Mode 3 cable: Remove the plug from the charging station electric vehicle socket-outlet, and attach the cap (where fitted) to the plug.

Store the NISSAN EVSE (where fitted) or NISSAN Mode 3 cable (where fitted) in its storage bag.

To store the NISSAN EVSE or NISSAN Mode 3 cable in the bag: Wind the charge cable clockwise against the control box (where fitted) (approximately 30 cm (12 in) in diameter).

Close the normal charge port cap.

Close the charge port lid.