Nissan Qashqai ePower 2025 Owners Manual

8.23.6.10. Undertake prevention (where fitted)

Undertake prevention (where fitted) can be used to prevent your vehicle from overtaking another vehicle on the wrong side. In countries where traffic drives drive on the right hand side of the road, undertake prevention will prevent you from overtaking on the right (undertaking). In countries where traffic drives drive on the left hand side of the road, undertake prevention will prevent you from overtaking on the left (undertaking).

The function is active when the travelling speed is above 80 km/h (50 MPH). When the travelling speed is significantly higher than the speed in the adjacent lane, the vehicle may overtake the vehicle in the adjacent lane.

A green marker will be displayed in the vehicle information display below the vehicle that you are attempting to undertake.

Setting Undertake Prevention in the Vehicle Information Display

  1. Press the image or image buttons on the steering wheel until the [Settings] menu is displayed in the Vehicle Information Display and press the scroll dial.

  2. Use the scroll dial to highlight [Driver Assistance] and then push the scroll dial.

  3. Select [Intelligent Cruise] and push the scroll dial then push the scroll dial

  4. Select [Undertake Prevention] and push the scroll dial to turn the Undertake Prevention system on or off.

image

When enabling/disabling the Undertake Prevention system through the Vehicle Information Display, the system retains the current settings even if the system is restarted.

Parent topic: